Schumacher Automatic SP2 User Manual download pdf (Page 8)

• 7 •

Check the polarity of the battery posts. The POSITIVE (POS, P, +) 7.1

battery post usually has a larger diameter than the NEGATIVE

(NEG, N, -) post.

Attach at least a 24-inch (61 cm) long 6-gauge (AWG) insulated 7.2

battery cable to the NEGATIVE (NEG, N, -) battery post.

Connect the POSITIVE (RED) charger clip to the POSITIVE 7.3

(POS, P, +) post of the battery.

Position yourself and the free end of the cable you previously 7.4

attached to the NEGATIVE (NEG, N, -) battery post as far away

from the battery as possible – then connect the NEGATIVE

(BLACK) charger clip to the free end of the cable.

Do not face the battery when making the nal connection.7.5

Connect charger AC supply cord to electrical outlet.7.6

When disconnecting the charger, always do so in the reverse 7.7

order of the connecting procedure and break the rst connection

while as far away from the battery as practical.

A marine (boat) battery must be removed and charged on shore. 7.8

To charge it onboard requires equipment specially designed for

marine use.

GROUNDING AND AC POWER CORD CONNECTIONS8.

RISK OF ELECTRIC SHOCK OR FIRE.

This battery charger is for use on 8.1

a nominal 120-volt circuit. The plug must

be plugged into an outlet that is properly

installed and grounded in accordance with

all local codes and ordinances. The plug

pins must t the receptacle (outlet). Do not

use with an ungrounded system.

8.2 Never alter the AC cord or plug provided – if it

does not t the outlet, have a proper grounded outlet installed by

a qualied electrician. An improper connection can result in a risk

of an electric shock or electrocution. NOTE: Pursuant to

Canadian Regulations, use of an adapter plug is not allowed in

Canada. Use of an adapter plug in the United States is not

recommended and should not be used.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 38 39

No comments

Schumacher Automatic SP2 User Manual Page 8