Schumacher MKC-10 User Manual download pdf (Page 5)

BATTERY

POSITIVE

NEGATIVE

24", 6 GAUGE

CABLE

POWER

CORD

BATTERY CHARGER

1. Check polarity of battery posts. Battery case will be marked

by each post: POSITIVE (POS, P, +) and NEGATIVE (NEG, N,

-). NOTE: The positive battery post usually has a larger diam-

eter than the negative post.

2. Attach a 24-inch long (or longer) 6-gauge (AWG) insulated

battery cable to NEGATIVE (NEG, N, -) battery post.

3. Connect POSITIVE (RED) charger clip to POSITIVE (POS, P,

+) post battery. Rock clip back and forth to make good con-

nection.

4. Position yourself and free end of 24 inch cable as far away

from battery as possible. Then connect NEGATIVE (BLACK)

charger clip to free end of cable. WARNING: Do not face

battery when making final connection. Rock clip back and forth

to make a good connection.

FIGURE 7 shows the connection.

5. Plug charger AC cord into 120 volt grounded outlet.

6. Turn switch from off to on.

7. When battery is fully charged, unplug charger from AC

power source.

8. When battery is fully charged and charger is unplugged, (1)

remove clip from end of Negative end of cable, and (2)

remove clip from Positive battery post, in that order.

9. Clean and store battery charger.

FIGURE 7 CONNECT NEGATIVE BATTERY CLIP

TO 24 INCH CABLE END

TO GROUNDED

POWER OUTLET

1 2 3 4 5 6 7 8 9 10 ... 15 16

No comments

Schumacher MKC-10 User Manual Page 5